Browse all practice questions for the Washington DC 3rd Class Boiler Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Washington DC 3rd Class Boiler Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Data printed on the equipment nameplate typically includes manufacturer, model, serial number, and what?
  • What is the area of a triangle with a base of 45 inches and a height of 26 inches?
  • How is moisture removed from a refrigerant system?
  • How often should a complete external inspection of a boiler be performed?
  • Proximate analysis reports which of the following?
  • Discrete control when used for steam pressure is what type of control?
  • In a multi-zone air handler unit, the zone thermostat controls the zone temperature by?
  • When is a pump steam bound?
  • Which statement best describes the relationship between pressure and floor height for a building’s water supply?
  • Which term is not one of the three T's of combustion?
  • What is pump slip?
  • During a 24-hour operation, how often should you check the water level?
  • Which trio is involved in controlling steam pressure and monitoring the combustion air intake?
  • Where is the cooling tower bleed line located?
  • In the horsepower calculation, increasing efficiency while holding GPM and height constant will do what to the calculated horsepower?
  • With hydroxide present and normal oxygen levels, which chemical will cause problems?
  • Which approach helps to achieve complete combustion in a boiler?
  • A duplex reciprocating pump has a bore of 5 inches, a stroke of 12 inches, runs at 75 rpm, and has a slip of 7%. What is the pump capacity in gallons per minute (gpm)?
  • A foot valve is described as which of the following?
  • An air handler unit supplies a constant supply air temperature of 55 degree F to building spaces and includes a coil called _____air handler unit?
  • What are the chemicals used to test water for hardness called?
  • Which device is used to remove moisture from refrigerant lines?
  • Which two quantities are multiplied together in the pipe expansion formula before applying the coefficient 0.0000065?
  • What type of flame detector senses infrared light?
  • During boiler blowdown, which valve is opened first and closed last?
  • Hard forming scale is primarily associated with which compound?
  • What are the two main types of controls?
  • The flow area A used in the relief valve calculation for a 2.5-inch valve is approximately:
  • Which component in a boiler system is primarily responsible for vaporization by absorbing heat?
  • The stamp of approval on a nameplate signifies what?
  • What is the maximum pressure that a 12 x 5 x 15 duplex reciprocating pump can develop when operated with 75-psi steam?
  • A 5 inch pipe filled with water to a height of 75 feet will have what pressure at the bottom of the pipe?
  • Which compound is not a heat producer?
  • What is the safety factor when a system is rated at 1200 psi with a maximum pressure of 200 psi?
  • The color for an R-134A refrigerant cylinder is _______?
  • What is the volume of a cylindrical tank that has a 60 inch diameter and a 72 inch length?
  • With normal oxygen and low alkalinity, what is added to boiler water?
  • The part of the refrigeration system that absorbs heat into the system is controlled by the ______?
  • In a dual duct air handling system space thermostatic controls building temperature by?
  • Which component is the heart of a refrigeration system?
  • Recycled and filtered refrigerant can be used where?
  • Where do you obtain a superheat reading?
  • In a multi-zone air handling unit, the zone thermostat controls the zone temperature by?
  • The oil in a refrigeration system is used for
  • Which condition is a boiler not protected against?
  • What is the last protection against overheating in a boiler?
  • The purpose of the condenser in a refrigerant system is to?
  • In a reciprocating chiller, which component prevents refrigeration migration?
  • What is the volume in cubic inches of a cylinder with a 15 inch diameter and 30 inch height?
  • A foot valve is installed at the end of which line, and what is its purpose?
  • A _____ valve should be used for throttling purposes?
  • The term used to describe the energy content of a liquid column due to its height, used to estimate pressure at a point is called what?
  • A boiler rated at 88,250 lb/h of steam per hour corresponds to approximately how many boiler horsepower?
  • A column of water 150 feet tall in a vertical pipe will produce what pressure at the bottom in psi?
  • In the GPM calculation for a 2" pipe, what conversion factor converts cubic inches to gallons?
  • The toxicity limit for Class B refrigerants is given in which unit?
  • What is the minimum discharge pipe height for a safety valve?
  • What does BTU stand for in heating calculations?
  • What kind of steam trap uses a simple float/disc that lifts?
  • The boiler steam line is 350 feet long. During start-up the pipe is heated from 60°F to 350°F. A 350°F pipe will expand by approximately how many inches due to the temperature change?
  • In the pump horsepower formula HP = GPM × 8.33 × Height ÷ (33000 × Efficiency), what constant is multiplied by GPM and Height?
  • What is the cross-sectional area constant used in the 2" pipe GPM calculation?
  • What is the volume of a cylinder with diameter 30 inches and length 20 inches?
  • Which byproduct is known for having the lowest heating value?
  • On boilers with both Quick opening and Screw-type blowdown valves, where must the Quick opening valve be located?
  • The flow area A used in the relief valve calculation for a 3-inch valve is approximately:
  • Which gas byproduct is associated with the greatest heat value (BTU)?
  • Water scales can be removed by boiling or raising water temperature. The effect is:
  • What is not an advantage of an economic boiler over a conventional HRT Boiler?
  • In an HVAC system controlled by a thermostat, what is the difference between the set point and the temperature at which the switch turns the system off called?
  • Which term describes an AHU that uses separate coils in side-by-side ducts for cooling and heating?
  • Plume discharges from the cooling tower shall not be less than how many feet?
  • A duplex reciprocating pump has a bore of 8 inches, a stroke of 20 inches, runs at 200 rpm, and slip of 5%. What is the pump capacity in gpm?
  • What is the component where liquid is vaporized by absorbing heat?
  • What does the whistle on the top of the water column indicate?
  • During mud drum inspection, which action would you not do?
  • A pump moves 250 gpm of water to a height of 75 ft with efficiency 96%. The horsepower required is approximately:
  • What is the area of a circle with a diameter of 18 inches using A = D^2 x 0.7854?
  • Every discharge pipe on a safety valve should be at least how high?
  • What is the primary function of the compressor in a refrigeration system?
  • In the compression ratio example, why is 14.7 psi added to both head and suction pressures before division?
  • What is the name of an AHU that provides heating, cooling, ventilation, and air conditioning to multiple buildings or areas?
  • A boiler steam line 450 feet long expands approximately how many inches when heated from 70°F to 360°F?
  • Which byproduct fuel has the lowest heating value?
  • Which formula expresses the area of a circle in terms of its diameter?
  • The color for an R-410A refrigerant cylinder is _______?
  • What is recommended as the best electrical grounding method?
  • Convert 92°C to Fahrenheit.
  • A duplex reciprocating pump has a bore of 10 inches, a stroke of 6 inches, runs at 120 rpm, and slip of 4%. What is the approximate capacity in gallons per minute?
  • What is the area of a circle with a 10 inch diameter?
  • Which compound is not heat producing?
  • What mechanical device is used to remove scale from fire tubes?
  • What size expansion tank is needed for a hot water system with 1000 gallons, 70 lb make-up, 70°F water in and 160°F water in the system?
  • What is the cost per gallon of the chemical used in the example?
  • Which description best defines steam bound?
  • What is the maximum toxicity level, in parts per million, for a Class B refrigerant?
  • How many BTUs does it take to raise 10 lb of water from 40°F to 41°F?
  • What is the total force on a valve with a diameter of 3 inches and a popping pressure of 150 psi?
  • What is the name of the hanged joint between two or more furnaces that may be located in the center of the furnace and spaced no more than 18 inches apart?
  • If boiler water has a pH of 5, what class of chemicals is added to neutralize the acidity?
  • What is the temperature rise used in the expansion calculation from 70°F to 360°F?
  • Between which two components does a siphon provide a protective water seal for boiler instrumentation?
  • What is the flow rate, in gallons per minute, of water flowing through a 4 ft diameter pipe at a velocity of 12 ft/s?
  • Which chemical compounds in water cause permanent hardness?
  • Water inlet into a building is 100 psig; if no booster pumps are used, what will be the pressure on the 10th floor if the building is 10 feet per floor?
  • Which boiler horsepower calculation uses the formula BHP = lb/hr x 1.08 divided by 34.5?
  • What is the monthly chemical cost calculated in the example?
  • What is a hydrostatic test?
  • What is the total force acting on a 4.5 inch pressure relief valve with a popping pressure of 500 psi?
  • Which factors are multiplied to compute the Average Evaporator Rate in the example?
  • What do you do to attain complete combustion in a boiler?
  • Which byproduct has the lowest heating value?
  • What is the area of a circle with a 35 inch diameter?
  • Which statement describes the Adamson Ring in relation to furnaces?
  • LWCO stands for what in boiler protection?
  • What part in a refrigeration cycle discharges, high temperature pressure of vapor?
  • What is the total force on a 4 inch diameter safety valve disc when boiler pressure is 12 psi?
  • What is meant by a pump becoming steam bound?
  • Which item is listed on the nameplate along with the manufacturer, model, and serial number?
  • Which type of pump can be started with the discharge valve closed?
  • Where should the expansion tank on a closed-loop system be located?
  • In the Zeolite Rejuvenation process, which step comes directly after Backwash?
  • Which of the following is not a parameter sensed by a three-element feed regulator?
  • What is the flow rate, in gallons per minute, of water flowing through an 8 ft diameter pipe at a velocity of 7 ft/s?
  • The heart of a refrigeration system is the _______
  • In a refrigeration system, which device governs the rate of refrigerant entering the evaporator?
  • What is the proper way of testing a safety valve?
  • Given a pump efficiency of 70%, delivering 1500 GPM against a 1000 ft head, what is the required motor horsepower?
  • Which gas is inert in combustion and not a heat-producing component?
  • The component that removes moisture from a refrigeration system is the
  • Which component is where the liquid refrigerant turns into gas and absorbs latent heat?
  • How many steps are there in the Zeolite Rejuvenation process?
  • What is the primary function of the mixing box in a duct air handling system?
  • What is meant by the percent of skip, step, and slip in a pump?
  • In boiler terminology, what is the difference between the theoretical pump displacement and the actual displacement called?
  • What type of valve would not be a good choice if sediment is present in a system?
  • Refrigerant flow into the evaporator is controlled by ___________?
  • Why are tube ends on a fire-tube boiler beaded?
  • What stays are used to support the burner chamber in a Scotch Marine boiler?
  • Which treatment is used to combat scale formation?
  • Which of the following is a positive displacement pump?
  • What compound produces soft scale in boiler water?
  • Which description best explains a foot valve on a pump?
  • How many cubic inches are in a gallon?
  • How often do you check the high limit switch?
  • In a dual duct AHU, where are hot and cold ducts directed to the space?
  • Controls which use a quantity measured over a range of dynamic values are?
  • In an open type expansion tank, how high above the highest heating element should the tank be mounted?
  • Convert 60°F to Celsius.
  • Which jumper is used to connect the neutral and ground?
  • What is the likely cause of high excess in a condensate return tank with temperature up to 20 degrees above normal?
  • Using TH = (C x 2.5) + (M x 4.1), calculate total hardness (ppm as CaCO3) for 75 ppm Ca and 42 ppm Mg.
  • What does a zeolite water softener system use as a means of regeneration?
  • In the Zeolite Rejuvenation process, which step comes directly after Brine?
  • In a siphon between a boiler and pressure controls, what is the water seal called?
  • A flow control should be blown down when?
  • If the highest set valve is 150 psi, what would be the maximum range for all saturated steam safety valves?
  • By clicking on the exhibit the picture is a display of which safety valve type?
  • In an open type expansion tank how high should the tank be mounted?
  • What do you use to bank off a boiler and bring it back online without using the shut off valve?
  • Which term best describes a control system that switches devices on or off as a single measured variable crosses a threshold?
  • What is the primary purpose of adding oil to the refrigerant?
  • The height in feet of a liquid above a point such as pump suction is called what?
  • What is a condenser?
  • An accelerated circulation water-tube boiler is characterized by which feature?
  • In the expansion tank sizing problem, what was the system water temperature used for calculation?
  • Which valve type is commonly used for throttling applications?
  • The energy unit used to express the heat required to raise water by one degree Fahrenheit per pound is known as what?
  • Which compound is hard forming scale?
  • What is the maximum range of pressure settings for all the saturated steam safety valves on boilers relative to the highest set valve?
  • Which of the following methods are used to support large furnaces in a SM boiler?
  • What is an accumulation test used for?
  • Which element does not take an active part in the combustion process?
  • Which statement best describes the water-tube boiler design?
  • Which component in the refrigeration cycle reduces high pressure gas to a liquid by removing heat?
  • A cadmium sulfide photocell senses which form of light?
  • What is the conversion factor used to convert feet of water head to psi for water systems?
  • Where is the total hardness of a softener reading 0.5 grains? (Using the conversion 17.1 × 0.5 = 8.6)
  • What part in a refrigeration cycle discharges low pressure liquid?
  • What device is installed between the boiler drum and the steam gauge to create a protective water-tight seal for the gauge?
  • Which chemical pairing is used to combat corrosion in boiler water systems?
  • What type of valve allows a boiler to cut in online when the main isolation valve is open or closed?
  • Where is the Adamson Ring joint commonly located?
  • Which component in a vapor-compression refrigeration system is responsible for absorbing heat from the refrigerated space?
  • Permits should be required for boiler work for how long?
  • What is the circumference of a circle with a 10 inch diameter?
  • Convert 185°C to Kelvin.
  • What must be submitted to the code official when field assembly of boilers is required?
  • A stoker that uses a feed RAM is a?
  • Cadmium sulfide photocells are most responsive to which spectrum?
  • An air handler unit that has hot & cold air ducts connected to (molding boxes?) located in each building space is called a __________air handler unit?
  • What is the role of the terminal reheat coil in an AHU?
  • Where is medium temperature liquid found?
  • What is shear?
  • How are high-pressure boilers equipped with Quick opening and Screw type blowdown valves blown down?
  • A boiler is rated at 86,250 pounds of steam per hour. What is the equivalent boiler horsepower?
  • If a boiler is operating at 80% load and the flame goes out suddenly, what happens to the water?
  • To prepare for a lever test, the boiler should be pressurized to what fraction of its operating pressure?
  • In boiler maintenance, what is the acceptable range for residual sodium sulfite?
  • Convert 31°C to Fahrenheit.
  • What is the vertical distance from the center line of the pump up to the top level of the supply tank called?
  • How is the fire tube in a boiler secured?
  • What mechanical device is used to remove scale from water tubes?
  • What is the maximum distance apart for the Adamson Ring joint between furnaces?
  • In the expansion formula Exp in = (T1 - T2) x L x 0.0000065, what does the constant 0.0000065 represent?
  • A reciprocating compressor operating with refrigerant R-410A head pressure of 476 psi and a suction pressure of 118 psi. What is the compressor's compression ratio?
  • Which unit is commonly used to express the toxicity of a Class B refrigerant?
  • When a safety valve discharges, it should relieve the boiler so that the pressure does not exceed more than ______?
  • A boiler has an input of 2800 and a loss of 600. Using the efficiency formula, what is the boiler efficiency?
  • Which component is defined as a device that acts as a check valve and helps maintain pump prime?
  • A proximate analysis of coal will not report what?
  • In the pipe expansion calculation, what unit should L be in if the coefficient is 0.0000065 per inch per degree Fahrenheit?
  • In the hardness calculation example, the product 17.1 × 0.5 equals 8.6. This value represents hardness in which unit?
  • Which valve is typically used to control blow down to avoid rapid flow changes?
  • Air leaking into the inner and outer of the boiler, what will happen?
  • What is a foot valve?
  • What is used to remove moisture from a refrigeration system after a repair?
  • When conducting an evaporation test, the operator must secure what?
  • In the total hardness formula TH = (C x 2.5) + (M x 4.1), what do C and M represent?
  • Convert 85°F to Rankine.
  • What is the wire that connects all components of a system to a physical ground or water pipe called?
  • What is the normal sodium sulfite range used in boilers?
  • In the boiler example, which equation expresses the relationship between Makeup, Condensate Return, Evaporator, and Blow Down?
  • What do you call a reading from the center of an impeller across to the gauge?
  • If 12 floors are each 10 feet tall, what is the approximate pressure on the 12th floor given a ground level pressure of 100 psi and the head conversion 2.31 ft per psi?
  • Where does liquid refrigerant vaporize and absorb latent heat?
  • How many BTUs are required to raise 10 pounds of steam from 40°F to 41°F?
  • What is the primary function of a three-element feed regulator?
  • What is an evaporator?
  • Permanent hardness in boiler feedwater is caused by which combination?
  • What is the purpose of a suction accumulator?
  • To protect boiler refractory from excess heat and increase boiler capacity, which addition is used?
  • Where is high temperature vapor found?
  • The Chief heat producing elements in fuels contents are?
  • In a water-tube boiler design, where do the combustion gases travel relative to the water?
  • What refrigerant has replaced R-22 in many HVAC systems?
  • Lead sulfide photocell is used as what kind of flame detector?
  • At what percentage of boiler pressure should the safety valve lever be tested?
  • What does RTD stand for in temperature sensing?
  • What are the two primary functions of oil in a refrigeration system?
  • Steam binding in a pump occurs when the suction static pressure falls below the vapor pressure corresponding to the temperature. True or False?
  • What is the replacement refrigerant for R-22 in modern systems?
  • What is the volume of a cylindrical tank that has a 24 inch diameter and a 48 inch length?
  • What is the relief pressure (psi) for a 3-inch pressure relief valve with a 1500-pound spring?
  • An air handler unit that provides heating, cooling, ventilation, and air conditioning to more than one building or area and has its cooling & heating Coil in separate side-by side ducts is called a _______air handling unit?
  • Which chemicals are used to combat corrosion in boiler water systems?
  • Boiler horsepower is calculated by dividing the steam production rate (lb/h) by which constant?
  • In a duct air handling system, space thermostat control building temperatures by?
  • How many BTUs are required to raise 2 lbs of water from 32°F to 212°F?
  • A boiler rated at 96,250 lb/h corresponds to approximately how many boiler horsepower?
  • On/off controls that activate devices using a single variable are called?
  • Who may reuse recycled and filtered refrigerant?
  • What is the flow rate in gallons per minute for water flowing through a 6-foot diameter pipe at a velocity of 9 ft/s?
  • How much excess air is required to burn coal?
  • A 12 inch pipe filled with water to a height of 250 feet will have what pressure at the bottom of the pipe?
  • Which pump requires more horsepower based on the given calculations?
  • Which treatment is used to combat scale?
  • Which device is described as having a float mechanism that rises to allow steam through and resets on condensate?
  • What is the circumference of a circle with a 26 inch diameter?
  • In a refrigeration cycle, which component condenses vapor into a liquid?
  • During a boiler hydrostatic test, the required water temperature is about 70°F. True or False?
  • In a hydrostatic test, to what multiple of MAWP is the pressure raised?
  • A replacement refrigerant for R-12 medium and high temperature refrigeration application is _____?
  • Who can make adjustments or repairs on a safety valve?
  • Identify the component described as a device that functions as a check valve and keeps the pump primed.
  • A 15 psi steam boiler produces 8000 pounds of steam per hour. The minimum pipe size for the pipe leaving the boiler is approximately how many inches?
  • Where do you get sub-cooling reading?
  • What type of maintenance is practiced when equipment is allowed to run until it fails?
  • What is the area of a triangle with a base of 20 inches and a height of 18 inches?
  • The safety valve lever test should be performed when boiler pressure reaches what fraction of the operating pressure?
  • The removal of moisture from air using a cooling coil is called _________ dehumidification?
  • A boiler hydrostatic test is performed by filling the boiler with water at about 70°F and raising pressure to 1.5 MAWP. True or False?
  • A steam line 600 feet long warms from 60°F to 350°F. With a coefficient of 0.0000065 per inch per degree, what is the expansion in inches?
  • Why is platinum used in RTD (Resistive Temperature Device)?
  • Which hydrocarbon gas byproduct has the highest BTU value?
  • Boiler safety controls are designed to protect against which combination of conditions?
  • Which statement is true about fire tube and water tube boilers?
  • What is the BTU content of a gallon of #4 fuel oil?
  • Which statement is NOT an advantage of the economic type boiler over the conventional type boiler?
  • Which formula is used to calculate the volume of a cylinder?
  • Which coal has the biggest level of fixed carbon content?
  • What is the result when a cylinder with bore 10 inches and stroke 24 inches has the piston travel two-thirds of the way?
  • What steam trap has one movable device that rises to allow steam through and resets on condensate?
  • A 3 element feed regulator senses which parameters to control water flow?
  • Boiler safety controls protect against how many distinct conditions?
  • What takes no actual action in combustion?
  • What is the total force on a valve with a diameter of 5 inches and a popping pressure of 200 psi?
  • What do the three "T"s of combustion stand for?
  • Approximately how many gallons per month of chemical solution are required in the example?
  • What type of safety valve is the Crosby nozzle-type?
  • If a condensate tank vent shows steam exiting at a temperature 20°F higher than normal, what is the likely cause?
  • How much excess air is needed for proper combustion of coal, gas or oil?
  • In a refrigeration cycle, which component expands high-pressure liquid to low-pressure liquid?
  • What is the total force acting on a 2 inch pressure relief valve with a popping pressure of 125 psi?
  • A duplex pump with steam pressure 60 psi and piston diameters 10 inches and 6 inches achieves maximum pressure Pw equal to Ps times the piston area ratio. What is Pw?
  • In the pump horsepower formula HP = GPM x 8.33 x Height x Specific Gravity / (33,000 x Efficiency), what constant is used to convert GPM to horsepower?
  • How often should you check the Low Water Fuel Cut Off?
  • Which two elements are the chief heat producing elements found in fuels?
  • What is the maximum pressure that a 15 x 9 x 10 duplex reciprocating pump can develop when operated with 125-psi steam?
  • A test on a 2" ID pipe with velocity 140 ft/s yields what GPM value?
  • During boiler shutdown, what is the first action you should take?
  • Which valve type would you place nearest the boiler in a blowdown line to ensure rapid opening?
  • Which valve arrangement is used to protect the boiler gauge by forming a water seal between the gauge and boiler water?
  • A Boiler shall be designed and constructed in accordance with?
  • Convert 185°F to Celsius.
  • What are the four steps of Zeolite Rejuvenation in order?
  • What is the primary purpose of a crank case heater on a reciprocating chiller?
  • Which expression correctly gives the cross-sectional area used in calculating force on a circular valve disc of diameter D?
  • Why is oil added to the refrigerant?
  • Proximate analysis identifies four data points: volatile matter, moisture, fixed carbon, and ash. Which option lists these four components correctly?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy